Independently Tested in Korea
G-LAY is manufactured by nanoTec International in Korea and verified by leading institutes, including the Korea Institute of Machinery & Materials (KIMM) and the Korea Automobile Technical Institute. Testing covered engine output, emissions, fuel efficiency, noise, abrasion, temperature and oil life, on real high-mileage vehicles.
Before vs. After G-LAY
| Measurement | Typical Result with G-LAY |
|---|---|
| Engine power output | Increased, up to +42% |
| Fuel efficiency | Improved 5% to 17% |
| Exhaust emissions | Reduced up to 70% |
| Friction coefficient | Reduced up to 80% |
| Noise & vibration | Reduced 35% to 56% |
| Engine oil life | Extended, around 3x |
| Coating durability | 20,000 to 30,000 km per dose |
What the Labs Confirmed
Engine Output
Dynamometer testing recorded higher power output after a single G-LAY treatment.Korea Automobile Technical Institute
Emission Reduction
Emission testing showed major drops in harmful exhaust output under idle conditions.Up to 83% lower
Fuel Efficiency
Steady-speed road testing at 80 km/h confirmed measurable fuel savings.5% to 17% saving
Noise & Vibration
Decibel testing over 60 minutes showed quieter, smoother running engines.Verified by service centre test
Oil Life & Acidity
Total Acid Value and viscosity testing over months showed longer, healthier oil life on a truck with 359,000+ km.Tested by KIMM
Abrasion Loss
Metallic abrasion particles (Fe, Si, Mn) in the oil were significantly reduced.Tested by KIMM
Oil Temperature
An increased lubricant membrane and thermal conduction lowered engine oil temperature.Tested by KIMM
Compressor Durability
A 5hp air-conditioning compressor showed improved abrasion durability over a 200-hour test.Tested by KIMM
Material Analysis
Raman, XRD, XPS and TEM analysis confirmed genuine reduced graphene oxide, not graphite imitation.Accredited test facility
Testing conducted during 2019 by KIMM, the Korea Automobile Technical Institute and accredited partner laboratories.
Certifications & Specifications
| Technical Data Sheet | Specification |
|---|---|
| Product | Chemically synthesised Graphene Layer |
| Appearance | Light powder dispersed in oil |
| Colour | Black |
| Specific surface area | 500 m²/g |
| D/G intensity ratio | 0.89 |
| Particle size | 0.25 nm thick, 50 nm wide |
| Manufacturer | nanoTec International, Daegu, Korea |
Quality Certificate
Issued for Graphene Layer oil additive, nanoTec International, 2019.
Made in Korea
Patented nano reduced-graphene-oxide technology.
Official Certificates & Lab Reports
Click any document to view it in full. Originals on file, issued 2019.
Trusted Science, Real Results
Give your engine the lab-proven protection of G-LAY. Order online and feel the difference.
Shop G-LAY Now